Nature’s Garden The Ghost With the Most CP Soap Kit Online

86 grams Distilled Water 
32 grams Sodium Hydroxide (Lye) 

38 grams Sunflower Oil 
68 grams Coconut Oil 76 
16 grams Apricot Oil 
9 grams Castor Oil 
30 grams Shea Butter 
32 grams Mango Butter  
34 grams Palm Oil 

17 grams Ghost with the Most Fragrance Oil   

1. Start by preparing your lye solution using the amounts listed above.  Weigh out your water slowly add your lye.  Note: Always add the sodium hydroxide to your water.  Never add your water to the sodium hydroxide. Repeat this process creating four batches of lye solution.
2. Weigh out your soaping oils as listed above.  Melt your soaping oils. Repeat this process creating four batches.
3. In a very small mixing bowl, weigh out the titanium dioxide and add a small amount of soaping oils.  Mix until clump free. You will only need one batch of this mixture. Set aside, for now. 
4. Weigh out 17 grams of The Ghost with the Most Fragrance Oil.  Repeat. You will also need 4 batches of the fragrance oil.  Set aside, for now. 
5. When both your lye solution and soap oils are around 130F and within 10 degrees of each other, combine one batch of lye solution with one batch of the soaping oils.  Stick blend to emulsify. 
6. Add about 10-15 drops of the Black Oxide FUN Soap Colorant.  Mix it using a short burst with your stick blender then hand mix to fully blend.  
7. Add the first batch of The Ghost with the Most Fragrance Oil.  Stick blend. 
8. Pour this layer into the loaf mold.  Tap on your counter to release any air bubbles.  Allow to set up a bit before moving to the next layer. 
9. Prepare your second layer.  Ensure both your lye solution and soap oils are within 10 degrees of each other, combine one batch of lye solution with one batch of the soaping oils.  Stick blend to emulsify. 
10. Add your titanium dioxide mixture.  Mix it using a short burst with your stick blender then hand mix to fully blend.  
11. Add one of the batches of The Ghost with the Most Fragrance Oil.  Stick blend. 
12. Pour your second layer.  Tap on your counter to release any air bubbles.  Allow to set up a bit before moving to the next layer. 
13. Make sure that both your lye solution are within 10 degrees of each other, combine one batch of lye solution with one batch of the soaping oils.  Stick blend to emulsify. 
14. Add about 10-15 drops of the Black Oxide FUN Soap Colorant.  Mix it using a short burst with your stick blender then hand mix to fully blend.  
15. Add some of The Ghost with the Most Fragrance Oil.  Stick blend. 
16. Pour this layer into the loaf mold.  Tap on your counter to release any air bubbles.  Allow to set up a bit before moving on to the final piped green soap. 
17. Make sure that both your lye solution are within 10 degrees of each other, combine one batch of lye solution with one batch of the soaping oils.  Stick blend to emulsify. 
18. Add about 10-15 drops of the Neon Green FUN Soap Colorant.  Mix it using a short burst with your stick blender then hand mix to fully blend.  
19. Add some of The Ghost with the Most Fragrance Oil.  Stick blend. 
20. Allow the soap to thicken to a frosting like consistency.  Once thick enough, add it to your piping bag. 
21. Pipe the soap onto the top of the loaf.  Sprinkle with mica. 
22. After 24-48 hours you can remove the soap from the mold.  Once the soap is ready, slice your soap.  Allow it to cure.